Pearl mushroom bag cultivation

Pearl oyster mushroom, also known as slippery mushroom, slippery mushroom, has high nutritional value, good taste, and large market demand. It is a kind of edible mushroom with great development potential. Pollution-free cultivation of pearl mushrooms should choose leeward sunny, there are irrigated conditions, well-ventilated plots to build a shed. The floor of the shed is required to be dry, tidy, securely framed, and completely sterilized inside the shed.

1. Formula 1 corn kernel (crush) 80%, fresh rice bran (or wheat bran) 19%, gypsum powder 1%. 2 86% of wood chips, 12% of fresh rice bran (or wheat bran) and 2% of corn flour. 3 25% wood chips, 65% corn, bran 9%, light calcium carbonate 1%. The formula above is the main ingredient and the insecticide is properly added during production. The water content is adjusted to 65% to 68%.

Second, bag inoculation plastic bags using low-pressure polyethylene bags, specifications 45 cm 45 cm, both sides folded, sealed. The plastic bag should be filled with elastic material. The dry material contained in each bag should not be less than 2 kg and the bagging height should be 16 cm. Atmospheric pressure sterilization, the temperature reaches 100°C for about 16 hours. When the feed temperature drops to about 30°C, it can be inoculated. In the sterile box, the bacteria species are uniformly sprinkled on the surface of the material, and the air in the bag is discharged, and the mouth is tied. Move to a sterilized cultivation site and pile it up in the shape of a “product”.

Third, the germination period management The germination period management is mainly the temperature management, so that the mycelium grow as much as possible in the appropriate conditions, as soon as possible to occupy the surface of the culture material to inhibit the growth of bacteria. Due to the large temperature difference between the upper and lower stacking culture materials, the upper and lower exchange positions are repeated every 7-10 days, so that the bacterial growth rate is the same. When the temperature rise is not conducive to the growth of mycelium, attention should be paid to ventilation and reduce the temperature. During the color change, the temperature is maintained at 20 to 25°C. Ventilate once a day early or late to increase fresh air in the shed.

Fourth, mushroom management When the temperature dropped below 25 °C, into the mushrooming period, this time with a knife along the edge of the top surface of the bacteria to draw a circle, remove the top cover of the plastic bag, with a sterile blade vertical stroke Several small 2 cm deep seams and moisture management. Water management is the key measure to increase production. In order to ensure the fruit body's growth and development needs of water, it can spray water to the bacteria lightly, so that the water content of the culture material gradually reaches about 90%. Pressing the finger to press the material can press water out. should. When the white primordium appeared on the culture material and it gradually became a mushroom bud, the water spray was stopped. In order to gradually reduce the moisture content of the culture material to 70% to 75%, the relative humidity of the air is 85% to 95%, and the surface of the culture material is kept moist and not dry. The air should be kept in circulation and fresh, but the wind should be prevented from blowing directly onto the cultivation block.

Fifth, timely harvest pearl mushroom is the original base at 10 ~ 15 °C, after 7 to 8 days to harvest. Harvesting should be conducted in accordance with export export quality standards or commodity sales standards. When the mushroom body on each of the pieces has reached the harvesting standard, it must be harvested once. When harvesting, use the thumb, forefinger, and middle finger to hold the base of the mushroom handle to loosen and lift it. Do not pull it out to avoid the mycelia. After harvesting, the bacterial surface should be promptly cleaned up, roots should be removed, and the culture blocks should be covered with a thin film, cultivated for 5-7 days, and then managed according to the above methods to harvest the next pearl mushroom.

Micirculation Microscope:

The Nailfold Capillaroscopy Microcirculation Microscope is an advance medical photoelectric apparatus,equipped with built in special LED light source,used mainly in observation on human nail fold capillary microcirculation or term as video Nailfold capillaroscopy,Such as capillary blood flow, abnormal microcirculation of the vascular structure, cell adhesion, through its powerful optical magnification. Undistorted, real time dynamic video streaming via Sony CCD imaging device onto the LCD monitor screen.

Micirculation Microscope

Micirculation Microscope

Digital Microscope,Micirculation Microscope,Blood Microcirculation Microscope,Microcirculation Microscope Device

Shenzhen Guangyang Zhongkang Technology Co., Ltd , https://www.lighttherapymachine.com