The winter and spring season is the peak period of egg hatching. Special farms and breeding households need to improve the production efficiency of Weifang, and the selection of hatching machines is very important. 1. Performance Structure: The structure of the incubators produced at home and abroad are basically the same, the boxes are generally made of colorful plastic steel or glass plate as the inner and outer plates, the middle is insulated with foam sandwich, and then combined with special aluminum profiles, the inside of the box is large. The diameter mixed-flow fan stirs the temperature and humidity inside the incubator, and the egg-holding racks are welded and fixed with angle iron. The turbine worm-type reducer is used to drive the transmission. The egg-turning operation is slow and stable without shaking, and the selected egg is used for special purposes. The egg trays are put into the iron rack layer by layer after the eggs are packed. According to the technical parameters set by the operator, the incubator equipment has a full set of automatic functions of automatic constant temperature, automatic humidity control, automatic egg turning and reasonable ventilation. Guaranteed the hatching rate of fertilized eggs. 2. Scientific selection: To select a good hatching machine, consider the use cost, reliability, hatching rate, service life, and after-sales service of the machine. Among them, the level of hatching rate is the most important indicator to measure the quality of equipment, and it is also the main reason why many hatcheries spare no expense in replacing advanced hatchery equipment. The temperature field inside the machine should be uniform, there is no temperature dead angle, otherwise it will reduce the hatching rate; the accuracy of the temperature control of the machine, Han Xian intelligence is better than fuzzy computer, fuzzy computer is better than integrated circuits. 3, the correct use: 1 First, the machine should be cleaned, add grease to the bearings. Check if there is any debris in the machine, whether the moving parts are flexible, whether the insurance is intact, whether the external wiring is correct, and whether the power supply voltage used is qualified. If the voltage is unstable, it is best to use a regulator. 2 The incubator room should be well-ventilated, and the machine should be placed on a layer of brick-slab or concrete platform. 3 Turn on the main line switch (regulator) first, then turn on the power switch. Next, turn on the fan switch, turn the big fan, the heating indicator light, and the heating tube work, and finally turn the egg switch. The alarm button can check if the alarm line is good. 4 After starting the machine, observe whether the rotation of the fan is normal, whether the turn-turning mechanism is working properly, whether the flipping angle is appropriate, and whether the control condition is good. After two days of startup, it is determined that the machine is working normally, and then eggs are laid for hatching. 5 When taking eggs, turn the egg switch off. Shake the egg rack with a rocker, then take the eggs. Then, turn on the switch, turn the egg turning mechanism to set the angle, return to work. Be sure to shake the handle in the direction of the arrow when turning the egg. 6 Check the tightness of the belt frequently. If it is too loose, the air volume is small, the ventilation is bad, and the temperature difference inside the machine is large. If it is too tight, the belt and motor life will be affected.
Radiology
X-Ray Film Digitizer,X Ray Film Digitizer,Digital Medical X-Ray
Dental Equipment Co., Ltd. , http://www.sofine-dental.com