1. Increase the temperature of diesel engine cooling water. The exit temperature of agricultural diesel engines is generally lower than 45°C, so that diesel oil cannot be completely burned, the oil viscosity is large, the running resistance is increased, and the fuel consumption is increased. Therefore, the temperature of diesel engine cooling water needs to be increased.
2. Maintain the best rake angle. The best angle of advancement angle for the 195 diesel engine is 16-20. When the diesel engine is used for a period of time, due to the wear of the plunger fittings and the injection pump transmission components, the oil supply advance angle will be reduced, resulting in too late oil supply and increased fuel consumption. Therefore, the oil supply angle should be ensured at an optimal angle.
3. Ensure that the machine does not leak oil. Diesel engine oil pipelines often have holes due to uneven joints, gasket deformation or damage. The solution is: 1 The gasket is coated with a valve paint on the glass plate to flatten it to correct the tubing connector. 2Increase the diesel recovery device. Bicycle spokes can be used instead of hollow screws to weld on the tank. Plastic pipes can also be used to connect the return pipe on the nozzle to the air-core screw so that the return oil flows into the tank.
4. Clean the oil before use. More than half of the failures of diesel engines come from the oil supply system. The solution is: 1 buy back the diesel to settling precipitation 2 ~ 4d before use, can precipitate 98% of impurities. 2 If you buy it now, place two layers of silk or toilet paper on the fuel tank strainer so that impurities can be filtered off.
5. Change the "big horse-drawn car" approach. Wells often have "large machines with small pumps" phenomenon, which is a waste of energy practices. Improvement measures: appropriately increase the number of diesel engine pulleys, increase the speed of the pump when the diesel engine is running at a reduced speed, and increase the flow, lift, and shaft power to achieve the purpose of energy saving.
6. Adjust the fuel injection pressure of the injector. Injector pressure of the 195 diesel engine injector (120+5) kg/cm2. When the injection pressure is lower than 100kg/cm2, the fuel consumption increases by 10-20/kW.h, and the pressure on the injection pump can be checked and adjusted by the comparative method.
Tattoo Furniture , Tattoo Light ,Shop Equipment & Furniture , Tattoo Furniture , Tattoo Furniture , Armrests , Tattoo Chair .
These products is necessary for a tattoo studio, especially for tattoo artists use. Tattoo light is a LED shop name or open tattoo. Tattoo bed is for customer who want to do tattoo to lay down.
Tattoo chair for the tattoo artist sit down to do tattoo. Armrest is for artists rest the arm on it to make tattoo easy.
We are specialized manufacturers from China, Studio Equipment, Tattoo Furniture suppliers/factory, wholesale high-quality products of Tattoo Light and manufacturing
Studio Equipment,Tattoo Furniture,Tattoo Light,Tattoo Chair
Redtop Tattoo Supply Co., Limited , http://www.redtop-tattoo.com