The three-in-one filling machine adopts the method of bottleneck conveying. When replacing the bottle shape, only a small number of replacement parts of the cover part need to be changed. The unique bottle washing, filling and capping design can save the maximum degree due to the replacement of the bottle type and maintenance. The labor and time spent, the smooth operation of the equipment, the simple operation and continuous improvement are the long-term goals of our company.
It is important to pay attention to the operation of the three-in-one filling machine before and after use. This is the key to the installation, commissioning, use and maintenance of the filling machine. This is the basic work related to the quality and efficiency of the filling machine manufacturer.
First of all, before the three-in-one filling machine is used, it must be installed and then debugged. Read the instructions carefully before commissioning and prepare the tools to be used. After the filling machine is installed, the filling rail and the bottle receiving tray are leveled, the liquid storage tank is filled with materials, and all the electrical switches are in the closed position. Insert the container to be filled into the tool box, connect the external power supply, the power socket must be a three-pin socket, and have a reliable grounding wire to prevent the machine from leaking power, turn the machine power switch to ON, and the power indicator light. Use the three-in-one filling machine to fill the support frame and hold the filling frame against it. Point the hand to the positioning sleeve on the top of the filling head. The positioning sleeve should be able to move up and down flexibly. The filling needle is exposed or retracted. No obstacles. Turn the switch under the liquid storage tank to the open position, so that the material can flow into the total metering pump. According to the total filling amount of each container, adjust the screw on the crank and rotate the knob of the filling speed control board to about 20 degrees. Then turn the switch on the filling speed control board to the open position.
After the three-in-one filling machine is used, pay attention to its maintenance. When removing and disassembling the piston during maintenance, remove the fixing screws at the same time to avoid affecting the other process requirements when removing the first one. Before the piston filler is cleaned, the remaining product should be removed and the tank filled with a mild cleaning solution. The cylinder has been lubricated at the factory. Please do not open or add any lubricating oil to ensure that the surface of the filling machine is clean and hygienic. In addition, while maintaining and properly using the filling machine, it is necessary to conduct regular inspections and commissioning. Only such a filling machine can work healthily and steadily.
Heng Li Seafood Co., Ltd. , http://www.zz-food.com