1. The power must be equipped according to the request of the machine. If the power is too large, the mechanical parts (such as the drive shaft and bearings, etc.) can be easily damaged. The oversized machines cannot work normally. The machine must be trained before the application of the machine to be familiar with the machine's performance and safety control procedures, trials, and adjustment and maintenance of the machine, and then the official application.
2. To accurately understand the productivity of imported machine labels
Some products are marked with unit time and kilograms, and they are marked with walking speed. As the silage cutter not only cuts but also crushes, the working efficiency of the crushing part directly affects the working efficiency of all machines. Some people mistakenly believe that the foreign machine has a large horsepower, so the application of exceeding the limit will not only damage the machine prematurely, but also This delays the golden harvest period, which is unfavorable to both the client and the operator. Therefore, the speed of the machine must be determined according to the actual field output and the given productivity of the machine.
3. Preparatory work should be carried out before the harvesting operation
Firstly, we must level all the Et 埂 in the plot so that it does not exceed 10 cm in height, so as not to damage the cutters and guards of the harvester, and to pick up the iron wires, iron blocks and other hard objects on the surface so as not to damage the comminuting parts of the machine. .
4. Growing multiple corn varieties suitable for silage
This kind of corn has a high yield and is easy to harvest. Although the S704 has a high yield, it has few tillers and has thick stalks that are not easily harvested. Due to the concentration of silage corn sowing time, the harvest time is also very concentrated, if the machine is equipped with can not meet the demand for the peak period of the operation, the corn harvested later can only be yellow, which is not worthwhile. Therefore, requests for sowing of silage corn were staggered in order to extend the harvest period. There is also a need to equip the machine with the peak workload of silage corn harvesting operations, generally increasing the amount of equipment by 30% of normal operations.
5. Do a good job of organizing the harvest of silage corn
From the understanding of the situation, the important reason for the inefficient application of imported machinery is the improper organization of production. First, the farmers have small planting area, the idle time of mechanical operations is greater than the pure operating time, the machine turns and has many empty lines, etc. The time for pulling the wagons is long and the utilization rate of the machines is low; the second is the hurriedness of the entrants to the battle, no training, no import. The machine performance does not understand, control errors cause man-made failures; third, sellers take interest in seizing the market, the stalls show a lot, the fronts pull long, and the after-sales service cannot keep up. Therefore, the cultivation of silage corn should be implemented as soon as possible to the scope of the operation, users in the selection of machines to the experts to consult more, the seller must be based on long-term, to achieve quality services.
Hydrolyzed Sponge White Powder
Sponge
Chengdu Sino Tech company , https://www.cnherbfun.cn