Double-layer glass reactor details

Double-layer glass reactor for glass reactor

1 Double-layer glass reactor is a commonly used biochemical instrument, widely used in modern fine chemical, bio-pharmaceutical, scientific research and other industries. It performs various tests under various conditions (including: constant speed, constant force, constant temperature). Including: concentration, distillation, retention, separation, purification reaction), is the ideal equipment for teaching, experiment, pilot test, production.

2, characteristics

A, electronic stepless speed regulation, motor without spark, safe and reliable, long life (30L or more use the original imported frequency converter).

B, high efficiency condenser to ensure high recovery.

C. The glass parts are all made of GG17 high temperature borosilicate glass material, which has good physical and chemical properties.

D, the installation of a discharge switch, recycling solvent is very fast.

E. The electrical components are carefully selected, and the main components are all imported original parts. F, reasonable structure, pay attention to materials. The whole machine adopts high quality stainless steel, aluminum alloy and new synthetic materials, which have the advantages of anti-corrosion, anti-rust and various solvents.

G, standardized connection method, easy to disassemble.

H, equipped with a vacuum gauge, the best working vacuum can be selected for low boiling point materials.

I. Sealed with PTFE and special rubber composite seals, it is very convenient to withstand various solvents and maintain high vacuum.

3 , the instrument installation steps:

1. After opening the package, check whether the main accessories of the machine are complete according to the packing list.

2. B. Assemble the frame according to the drawings as shown in the figure.

3. C. Install the electrical box on the top of the right rear pole and tighten the screw and insert the seven-pin plug. Vacuum gauge installed in

At the back end, tighten the screws.

4, D, according to the height of use, the kettle circular bracket is fixed on the pole slider, the kettle is placed on the bracket, the semi-circular hoop is used to fix the kettle neck into the pole slider respectively, and after tightening, tighten and fix Screw, pay attention to the vertical body of the reactor when installing.

5. The stir bar is fixed on the ring clamp of the motor main shaft. The stir bar passes through the middle rotary bearing of the cover, tighten the special connector, and then adjust the position of the motor, paying attention to the vertical concentricity.

6. The slider on the pole is a stainless steel multi-purpose clamp that adjusts the direction and height in different directions.

7. On the left side of the bottle cap, the 40# standard port plug-in type reflux condenser, the right side 40# is the feeding port connected to the constant pressure funnel, the middle front 24# port is the plug-in thermometer casing mouth, and the hat rear is the 34# standard port. It is a multi-functional spare port, and the bottom is provided with a discharge valve, and the bottom of the kettle body is respectively a circulating fluid inlet and outlet. The lower port is connected to the circulating fluid inlet, and the upper port is connected to the circulating fluid return port.

8. When installing the glass instrument, it must be cleaned, and the interface should be coated with Vaseline to prevent the glass from locking up, and then apply vacuum grease to prevent air leakage.

9. Press the universal wheel wheel fixing device to stir. If the stirring is stable, the debugging is good.