SUS#304 Stainless Steel Electric Operating Table Mt2100 with CE

Model NO.: MT2100(Classic Model)
Size: L:2100±50mm / W:555mm
Certificate: CE,ISO9001,ISO13485
Material: SUS#304 Stainless Steel
Motor: Danish Linak Brand
Height Adjustment: (750-1000) ± 50mm
Table Longitudinal Scope: 400±50mm
Leg Evagination: ≥90°
Back Board up: ≥80°
Back Board Down: ≥40°
Trademark: Mingtai
Transport Package: Each Packed Into Polybag, Then Wooden Box
Specification: CE
Origin: China
HS Code: 9402900000
SUS#304 stainless steel electric operating table MT2100 with CE

SUS#304 Stainless Steel Electric Operating Table Mt2100 with CE

Operating Table MT2100 (Classic Model)


Main Configuration:

1.304 stainless steel

2. Six set motor, double Linak motors rise the back board, LINAK linear motor from Denmark

3.2 motors rise the back board, "T" shaped base design

4. Double control pattern, built-in emergency power

5. Electrical brake and electrical kideny elevator(optional)


Technical Parameters:
Parameters MT2100
Length 2100±50mm
Width 555mm
Lowest and highest table height (750-1000) ± 50mm
The lowest custom height 600mm
Custom table height of up and down between 200-450mm
forward and backward tilt ≥32°
Table longitudinal scope 400±50mm
Left/right tilt ≥22°
Leg board down ≥90°
Leg evagination ≥90°
Back board up ≥80°
Back board down ≥40°
Head board up/down ≥90°
Kidney elevator ≥130mm
Power AC 220V 50Hz
Input power 500VA


Main feature:

1.
Electric motor driving system: Imported the Danish LINAK brand motor, low noise, smooth table motion, lifting and rising, forward and backward, left ward and rightward and the back plane are all controlled by system, manual head plate and leg plate, easy and convenient for operate.

2.
6 electric motor, 2 of them rise the flanks back board. High performance charged battery can work ≥ 50 times to make sure the operation table can work without power source.

3.
The whole bed is made of high quality SUS304# stainless steel, super thick≥ 4mm (not stainless steel cover). The whole surgery bed, cover and accessories are all made of high-quality nickel chromium alloy stainless steel, not rusting within 15 years, excellent sealing, polishing surface treatment, impact resistance, prevent scratch resistance, wear resistance, disinfection, easy to clean, fully meeting disinfection after operation

4.
Fairily "T" shape base design supple excellent shock resistance and stability, easy for clear and disinfection. Six sections board design: Head board, back board, built-in kidney elevator, leg board and pedal board.

5.
Square lifting column is made by Germany, which has 4 times safety factor and 8 fasteners which can make it stable.

6.
Mattress: The memory mattress, thickness is 70mm, effectively relieve patients pressure point, prevent postoperative bedsore occurred; Mattress material is conformed with the safety standard, the surface is antibacterial, easy to clean, meeting the operating room disinfection requirements.

7.
With non-slip floor side rail safety design to prevent the attachment falling, in case of injury

8.
Longitudinal movement function: Imported slideway system makes it easier for longitudinal movement, the max longitudinal scope is 350mm, and it also can guarantee enough space under the table bed for C-arm's X-ray transillumination and other special surgery.


SUS#304 Stainless Steel Electric Operating Table Mt2100 with CE


SUS#304 Stainless Steel Electric Operating Table Mt2100 with CE

SUS#304 Stainless Steel Electric Operating Table Mt2100 with CE


SUS#304 Stainless Steel Electric Operating Table Mt2100 with CE


SUS#304 Stainless Steel Electric Operating Table Mt2100 with CE

ULITE Impact Drill have high power. 500W, 530W ,800W. Long longevity motor using. Quiet and smooth gear voice. Little sparkling. Variable speed and reversing switch. Bearing is C & U certificated in china. Using longevity is long. Worker using is high efficiency. Drill chuck is 13mm.

Safety
1. Be sure to carry out strictly the relevant rules or obey the explanation first.
2. The workpiece to be drilled must be paied more attention regulary when it is drilled.
3. Use the plug correctly. Don`t change the plug and wire separately. And don`t access to power if the plug wire is broken. Take off the plug in time when the electric drill isn`t used. 
4. Don`t extend the length of the power wire, and keep the power wire away from the heat source and oil.

Operation
1. Pls use machine under accurate voltage.
2. Keep the tool in non-loading for one minute. Check the transmission position is flexible and make sure there is no abnormal. Check the inverting switch is normal.
3. The head of the drill is sharp, Pls don`t touch is when you are drilling. If the rotation speed is reduced abnormally or stop suddenly or get stuck. Please turn off the power immediately.
4. Carbon brush should be checked periodically and replaced in time. If the carbon brush is finished, the carbon brush end would contact with commutator. The motor would be burnt.
5. When it is in following conditions, Pls don`t be used and send to repair immediately.
     a. The insulation is damaged.
     b. The power wire or electric cable case is broken.
     c. The plug and wire is broken.
     d. The sparkle appears seriously
6.  The tools must be grounded and avoid to be shocked.
 

Impact Drill

Impact Drill,Impact Cordless Drill,Electric Impact Drill,Corded Impact Drill

ZHE JIANG ULITE TOOLS MANUFACTURE CO.,LTD , http://www.ulitepowertool.com